Secutron Inc. 39
6 MR-2605 System
Programming
Programming the MR-2605 System is done using the Silence Trouble, Alarm Silence controls
and the indicator LEDs. Programmed operating mode data is stored in non-volatile memory
that retains the information if the power to the panel is removed.
The following are the MR-2605 System Programmable Functions
• Zone Programming
• NAC Sounding Rate
• NAC Auto-Silence and NAC2 Strobe Mode
• 60 Second Signal Silence Inhibit and Audible Walk Test
• Waterflow Programming
• Reference AC Line Frequency (50 or 60 Hz)
There are two additional operational modes that can be performed, the Reset Programming
Mode and Viewing the Event Buffer. For more information on
The Reset Programming Mode can perform the following.
• Adding and Removing a Module
• Defaulting the System
During Installer Programming Mode, each Programmable Function is displayed on the panel
using the LED Indicators.
To Next Page
Loading...
