Seg WI Series Reference Manual

Device planning Description
“-” Do not use
use use
Device planning
Selection list referenced by the following parameters:
• ╚═▷ Life Load . Mode•
Device planning Description
“-” Do not use
use use
Mode
general operation mode
Selection list referenced by the following parameters:
•
╚═▷ Modbus . Mode
•
Mode Description
“-” Do not use
RTU RTU
De󰃰nition
If set to “Alarm”: The function operates as a supervision function, i.e. a fault generates
neither alarm nor trip, but an »Alarm« signal gets issued instead. If set to “Trip”: The
function operates as a protection function, i.e. trips the breaker in case of a fault.
Selection list referenced by the following parameters:
• ╚═▷ I> . De󰊟nition•
•
╚═▷ I>> . De󰊟nition
•
• ╚═▷ I>>> . De󰊟nition•
• ╚═▷ IG> . De󰊟nition•
• ╚═▷ IG>> . De󰊟nition•
128 WIC1 WIC1-2.0-EN-REF
13 Selection Lists

Seg WI Series Specifications

General

Brand	Seg
Model	WI Series
Category	Relays
Language	English