Sega Snakes & Ladders - Power Supply and Connections; Power Supply & Connections; Turning On the Power

ASSEMBLY AND INSTALLATION
24 25
ASSEMBLY AND INSTALLATION
6 6
• Usethepowersupplyequippedwithanearthleakagebreaker.Useofpower
supplywithoutsuchabreakercouldresultinreifthereisacurrentleakage.
• Have available a securely grounded indoorground terminal. Without proper
grounding, customers could be electrocuted and product operations might not
alwaysbestable.
• Donotexposethepowercordorgroundwire.Iftheseareexposed,customers
couldstumbleover them, for instance,andeasilydamage them. Additionally, if
theselinesaredamaged,therecouldbeariskofelectricalshockorshortcircuit.
Set these lines at locations where they will not interfere with customer trafc, or
attachcoverstothem.
• Afterlaying out thepowercordonthe floor, be sure to always protect it. If
thepowercordis left exposed, it caneasilybedamaged,resulting in electrical
shock.
1
Conrm that the main switch is at OFF.
Mains ON/OFF Switch
IEC Inlet
6-3 POWER SUPPLY AND OTHER CONNECTIONS
ON/OFF
2
Fully insert the power cord connector on the side opposite the power plug into the AC unit IEC inlet. Insert
the power cord plug into the outlet.
3
The power code is laid out indoors. Protect the power cord by attaching wire cover to it.
WIRE COVER
Set the main switch of the AC unit to ON and engage the power.
When you turn on the power, both feature wheel will spin slowly in a downward direction before comming
to rest.
The lighting effects around the feature wheel and ladder will illuminate.
The Billboard light will illuminate and the feature wheel will come to a standstill.
Start up sounds are output from the speakers on the front of the cabinet.
The Game will now be playable.
6-4 TURNING ON THE POWER