SEH PS Series - Administration via FTP;FTPS Connection

Administration Methods
Print Server User Manual Windows 25
3.3 Administration via FTP/FTPS Connection
FTP
The File Transfer Protocol (FTP) allows the exchange of data between
the print server and an FTP client in TCP/IP networks.
FTP over SSL/TLS
(FTPS)
The print server also supports FTPS (FTP over SSL) for a safe data
interchange between the print server and the client.
We recommend using SSL/TLS so that unencrypted user names, pass-
words, and data cannot be read by unauthorized persons.
Configuring
Parameters via FTP
Connection
You can configure all print server parameters via FTP. To this pur-
pose, you must download the 'parameters' file to your local com-
puter via FTP and then edit it.
Proceed as follows:
1. Change to the directory in which you wish to save the file.
2. Open an FTP connection to the print server:
Syntax: ftp <IP address>
Example: ftp 192.168.0.123
3. Enter an arbitrary user name.
4. Enter the print server password or press the enter key if no
password has been assigned.
5. Transfer the 'parameters' file from the print server to your local
computer:
get parameters
6. Edit the file using a text editor.
The syntax and values can be obtained from the parameter list;
see: 162 .
7. Send the file back to the print server:
put parameters
8. Close the FTP connection:
quit
 The print server will be configured using the new values.