SEH PS Series - How to Configure Bonjour

Network Settings
Print Server User Manual Windows 41
Configuring DNS via the InterCon-NetTool
Requirements
 The InterCon-NetTool is installed on the client, see: 15.
 A WINS server is available in the network.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the print server in the device list.
The Properties dialog appears.
3. Select Configuration – DNS.
4. Configure the DNS parameters; see: Table 5 40 .
5. Click OK to confirm.
 The settings are saved.
4.6 How to Configure Bonjour
'Bonjour' allows the automatic recognition of computers, devices,
and network services in TCP/IP-based networks.
The print server uses Bonjour to:
• check the IP address assigned via ZeroConf (7).
• match host names and IP addresses
• announce its Bonjour services (printing services, Printserver
Homepage)
What do you want
to do?
 ’Configuring Bonjour via the Print Server Homepage’ 41
 ’Configuring Bonjour via the InterCon-NetTool’ 42
 'View Bonjour status' 55
Configuring Bonjour via the Print Server Homepage
Proceed as follows:
1. Start the Printserver Homepage.
2. Select Configuration – Bonjour.