Administration Methods
Print Server User Manual Windows 23
3.2 Administration Via InterCon-NetTool
The InterCon-NetTool is a software tool developed by SEH Comput-
ertechnik GmbH for the administration of SEH print servers.
Mode of Operation
After the InterCon-NetTools is started, the network will be scanned
for connected print servers. The network range to be scanned is
freely definable. All print server found will be displayed in the
'device list'.
You can modify the device list and adapt it to your individual needs.
You can select the print servers in the device list and configure
them.
Installation
In order to use the InterCon-NetTool, the program must be installed
on a computer with Windows operating system.
1. Download the installation file for the InterCon-NetTool from
the homepage of the SEH Computertechnik GmbH:
http://www.seh-technology.com/services/downloads.html
2. Start the installation file.
3. Select the desired language.
4. Follow the installation routine.
The InterCon-NetTool will be installed on your client.
Program Start
You can identify the InterCon-NetTool by its icon: . The Inter-
Con-NetTool can be started with the usual mechanisms of your
operating system.
The program settings are saved in the InterCon-NetTool.ini' file. This
file is stored in the user folder of the user that is currently logged in.
To Next Page
Loading...
