Printer Status and Printer Messages
Print Server User Manual Windows 85
9.5 How to View the Job History
Information on the print jobs handled by the print server are regis-
tered and shown in the job history.
A maximum of 64 print jobs are displayed. From the 65th print job
onwards the FIFO method (first-in, first-out) is applied. The saved
print jobs will be deleted when the print server or printer is turned
off or reset. The print jobs will not be deleted when the print server
is restarted.
Depending on the connected printer model, the following informa-
tion is shown in the job history:
Table 14: Job History - Status Information
Parameters Description
No. Number of the print job.
Status Status of the print connection. The following statuses are
possible:
• 'Pending' means that the print job has been accepted by the
print server but that the data transfer has not yet started.
• 'Processing' means that the print job has been transferred
from the print server to the printer.
• 'Processing stopped' means that the data transfer to the
printer was interrupted. This can occur if, for example, the
printer ran out of paper. If the printer error is fixed, data
transfer will be resumed.
• 'Completed' means that the print server has completely
forwarded the print job to the printer.
• 'Aborted' means that the print job has been aborted. This
can occur if, for example, the print server has been restarted
while the print job was processed.
Printer port Port that is used for printing.
This parameter is only available for print server models with
several physical printer ports.
Protocol Protocol used to transfer the print data.
Name Job names of print jobs using the protocols HTTP, IPP, LPR
and LPD. The string starts with the identification number of
the print job, followed by the host name of the device from
which the print job has been spooled.
Sender Sender of the print job (in TCP/IP networks).
Size Size (in kB) of the print job.
Pages Number of pages of the print job.
To Next Page
Loading...
