SEH PS Series - How to Secure the Print Server Parameters (Backup)

Maintenance
Print Server User Manual Windows 119
13.1 How to Secure the Print Server Parameters
(Backup)
All parameter values of the print server (exception: passwords) are
saved in the 'parameters' file.
You can save the parameters file as backup copy on your local client.
This allows you to get back to a stable configuration status at any
time.
You can edit the parameter values of the copied file using a text edi-
tor. Afterwards, the configured file can be downloaded to one or
more print servers. The parameter values included in the file will be
taken over by the device.
What do you want
to do?
 ’Saving the Parameters File to the Client via the InterCon-
NetTool’ 11 9
 ’Editing the Parameters File’ 121
 ’Downloading the 'Parameters' File to one or more Print Servers
using the InterCon-NetTool’ 121
 ’Load the Parameters onto the Print Server via the Print Server
Homepage’ 122
 ’Resetting Parameters via the Print Server Homepage’ 124
 ’Resetting Parameters via the InterCon-NetTool’ 124
 ’Resetting Parameters via an FTP Connection’ 124
 ’Resetting the Parameters via the Button’ 125
Saving the Parameters File to the Client via the InterCon-NetTool
Requirements
 The InterCon-NetTool is installed on the client, see: 15.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Select one or more print servers in the device list.
3. Select Actions – Download parameters file an.
The Parameter Download dialog appears; see Fig. 7 120 .
4. Select a print server.