SEH PS Series - How to Configure WLAN

Network Settings
Print Server User Manual Windows 47
Configuring SMTP via the InterCon-NetTool
Requirements
 The InterCon-NetTool is installed on the client, see: 15.
 The print server is set up as user with its own email address on a
SMTP server.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the print server in the device list.
The Properties dialog appears.
3. Select Configuration - Mail - SMTP.
4. Configure the SMTP parameters; see: Table 8
46 .
5. Click OK to confirm.
 The settings are saved.
4.9 How to Configure WLAN
The print server 'PS55' is a WLAN device and is operated wirelessly in
the network. During the first setup, the print server is embedded
into your WLAN network using WPS (Wi-Fi Protected Setup). Quick
Installation Guide.
What is WLAN?
WLAN is a radio technology that allows you to establish wireless
connections between network components. The WLAN technology is
defined as a standard of the IEEE 802.11 family. The PS55 supports
the standards IEEE 802.11b, 802.11g and IEEE 802.11n.
The PS55 has additional WLAN parameters; see: 49. The current
connection status is displayed on the Prints Server Homepage under
STATUS – Wireless. For further information on the connection state;
see: 55.