SEH PS Series - How to Assign Print Jobs Directly

Print Jobs and Print Data
Print Server User Manual Windows 69
4. Click Save to confirm.
 The setting will be saved.
Defining a Timeout via the InterCon-NetTool
Requirements
 The InterCon-NetTool is installed on the client, see: 15.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the print server in the device list.
The Properties dialog appears.
3. Select Configuration – General.
4. Enter the time frame in seconds after which the connection will
be aborted into the Job receive timeout box.
We recommend to set the value to '120'. (0 s = off)
5. Click OK to confirm.
 The setting will be saved.
8.2 How to Assign Print Jobs Directly
You can assign print jobs directly to the printers via the print server
without having to open the file-specific application software.
The print file can be assigned via the Printserver Homepage or the
InterCon-NetTool.
The print file must be in a format that suits the printer. When a print
file is downloaded to the print server, the file is automatically recog-
nized as print file and printed.
Make sure that the logical printer does not convert data (e.g. ASCII
to PostScript), see: 73.
What do you want
to do?
 ’Assigning the Print File via the Print Server Homepage’ 70
 ’Assigning the Print File via the InterCon-NetTool’ 70