SEH PS Series - Network Settings; How to Configure IPv4 Parameters

Network Settings
Print Server User Manual Windows 31
4 Network Settings
What Information
Do You Need?
• ’How to Configure IPv4 Parameters’ 31
• ’How to Configure IPv6 Parameters’ 34
• ’How to Adapt the Network Speed’ 37
• ’How to Configure NetBIOS/WINS’ 38
• ’How to Configure the DNS’ 40
• ’How to Configure Bonjour’ 41
• ’How to Use SNMP’ 43
• ’How to Configure POP3 and SMTP’ 43
• ’How to Configure WLAN’ 47
4.1 How to Configure IPv4 Parameters
TCP/IP (Transmission Control Protocol over Internet Protocol) for-
wards data packets across several connections and establishes a con-
nection between the network participants.
The boot protocols DHCP and BOOTP belong to the TCP/IP protocol
family. You can define various IPv4 parameters for an ideal integra-
tion of your print server into a TCP/IP network. For further informa-
tion about the IP configuration, see: 7.
What do you want
to do?
 ’Configuring IPv4 Parameters via the Print Server Homepage’
32
 ’Configuring IPv4 Parameters via the InterCon-NetTool’ 33

You can define various settings for an ideal integration
of the print server into a network. This chapter explains
which network protocols and settings are supported by
the print server.