SEH PS Series - How to Configure NetBIOS;WINS

Network Settings
Print Server User Manual Windows 38
3. Select Configuration – General.
4. Select the desired setting from the Ethernet settings list.
5. Click OK to confirm.
 The setting will be saved.
4.4 How to Configure NetBIOS/WINS
'NetBIOS' (Network Basic Input Output System) allows you to
address a client in Microsoft Windows networks not only via a
unique TCP/IP address but also via a unique NetBIOS name.
Benefits and
Purpose
'WINS' (Windows Internet Naming Service) is a system for the
dynamic resolution of NetBIOS names.
What Do You Want to
Do?
 ’Configuring NetBIOS/WINS via the Printserver Homepage’
38
 ’Configuring NetBIOS/WINS via InterCon-NetTool’ 39
Configuring NetBIOS/WINS via the Printserver Homepage
Requirements
 A WINS server is available in the network.
Proceed as follows:
1. Start the Printserver Homepage.
2. Select Configuration - Microsoft Windows.
3. Configure the parameters; see: Table 4 38 .
4. Click Save to confirm.
 The settings are saved.
Table 4: Microsoft Windows Parameters
Parameters Description
NetBIOS Enables/disables peer-to-peer printing.
NetBIOS name Print Server name Appears in the relevant
workgroup or domain.
NetBIOS domain Name of an existing workgroup or domain.