Port Settings
Print Server User Manual Windows 51
5 Port Settings
Feasible port settings depend on your print server model. In the case
of print servers with several ports, you can configure the parameters
for each port individually.
What Information
Do You Need?
• ’How to Enable PJL’ 51
• ’How to Enable 1284.4/MLC’ 52
• ’How to Define the Communication Mode’ 54
• ’How to Configure COM1 Port Settings’ 55
In order to determine to which port the print data is to be for-
warded in the case of print servers with several physical ports, see:
’Wie verwende ich logische Drucker? (Filterfunktionen)’ 68.
5.1 How to Enable PJL
With PJL (Print Job Language) commands you can get additional
printer information such as detailed status information, printer
panel readings or printed pages statistics.
Which information (if any) will be displayed depends on the degree
in which the printers can interpret PJL commands. Refer to the man-
ual of your printer for further information.
The print server recognizes if a printer supports PJL and displays this
on thePrint Server Homepage under Status – Printer Port in the
Printer emulation parameter.
The option '1284.4/MLC' may not be enabled at the same time.
This chapter explains how you can improve the interac-
tion between printer and print server by choosing the
right port settings.
To Next Page
Loading...
