SEH PS Series - How to Protect Printers against Unauthorized Access (IP Sender Control)

Security
Print Server User Manual Windows 90
Disabling HTTP via the Print Server Homepage
Proceed as follows:
1. Start the Print Server Homepage.
2. Select Configuration - Protection.
3. Clear HTTP.
4. Click Save to confirm.
 The setting will be saved.
Enabling or Disabling HTTP via the InterCon-NetTool
You can disable HTTP via the InterCon-NetTool.
If you disabled HTTP previously, you can enable HTTP via the Inter-
Con-NetTool.
Requirements
 The InterCon-NetTool is installed on the client, see: 15.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the print server in the device list.
The Properties dialog appears.
3. Select Configuration - Protection.
4. Tick/clear HTTP.
5. Click OK to confirm.
 The setting will be saved.
10.3 How to Protect Printers against Unauthorized
Access (IP Sender Control)
In TCP/IP networks you can define which IP addresses and thus
which workstations are allowed to access a printer and print.
Benefits and
Purpose
The 'IP Sender Control' allows you to protect printers and sensitive
data against unauthorized access and to attribute print costs pre-
cisely within the company.