Network Settings
Print Server User Manual Windows 39
Configuring NetBIOS/WINS via InterCon-NetTool
Requirements
The InterCon-NetTool is installed on the client, see: 15.
A WINS server is available in the network.
1. Start the InterCon-NetTool.
2. Double-click the print server in the device list.
The Properties dialog appears.
3. Select Configuration - Microsoft Windows.
4. Configure the parameters; see: Table 4
38
.
5. Click OK to confirm.
The settings are saved.
NetBIOS refresh every Time interval (in minutes) for updating the NetBIOS
parameters.
WINS registration Enables/disables the WINS services.
WINS via DHCP Enables/disables the entry of the IP address of a
WINS server via DHCP.
If the option is disabled, you can enter the IP address
of the WINS server manually.
Primary WINS server IP address of the primary WINS server
Secondary DNS server IP address of the secondary WINS server
Parameters Description
To Next Page
Loading...
