SEH PS Series - Page 91

Printer Status and Printer Messages
Print Server User Manual Windows 86
A time server (51) must be configured on the print server so that
the date and time can be displayed correctly. If no time server is
configured, the time stamp corresponds to the default time.
What do you want
to do?
 ’Displaying the Job History via the Print Server Homepage’
86
 ’Displaying the Job History via the InterCon-NetTool’ 86
Displaying the Job History via the Print Server Homepage
Proceed as follows:
1. Start the Print Server Homepage.
2. Select Status – Job History.
 The job history is displayed.
Displaying the Job History via the InterCon-NetTool
Requirements
 The InterCon-NetTool is installed on the client, see: 15.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the print server in the device list.
The Properties dialog appears.
3. Select Status - Job History from the navigation bar.
 The job history is displayed.
Creation time Time at which the print job has been sent to the print server.
Duration The time (in seconds) needed by the print server for
processing the print job.
Parameters Description