Network Settings
Print Server User Manual Windows 42
3. Configure the Bonjour parameters; see: Table 6
42
.
4. Click Save to confirm.
The settings are saved.
Table 6: Bonjour Parameters
Configuring Bonjour via the InterCon-NetTool
Requirements
The InterCon-NetTool is installed on the client, see: 15.
1. Start the InterCon-NetTool.
2. Double-click the print server in the device list.
The Properties dialog appears.
3. Select Configuration – Bonjour.
4. Configure the Bonjour parameters; see: Table 6
42
.
5. Click OK to confirm.
The settings are saved.
Parameters Description
Bonjour Enables/disables Bonjour.
Bonjour name
(LPT1,LPT2...)
(USB1,USB2...)
Defines the Bonjour name of the print server.
The print server uses this name for its Bonjour
services. If no Bonjour name is entered, the default
name will be used (printer name@ICxxxxxx).
You can enter a maximum of 63 characters. The
name must not start with an underscore.
(As for print servers with several physical printer
ports, each port can have a name).
To Next Page
Loading...
