105
K600000000SE 030804 011018
13.7 Measurements→Tightness test
15/01/14
10:00
Tightness test
Existing
Result
New
KEY FUNCTION
Activate the context keys shown on the display.
Returns to the previous screen.
PARAMETER DESCRIPTION
With this menu it is possible to perform a tightness test, in accordance with UNI 7129-1: 2015
(on new systems or systems that have been restored after a repair) or in accordance with
DVGW TRGI 2008.
SEE SECTION 13.8 or SECTION 13.10.
With this menu it is possible to perform a tightness test, in accordance with UNI 11137, on
existing systems.
SEE SECTION 13.9.
It is possible to enter the gas meter no. or location (4 rows up to 24 characters each) in
accordance with DVGW TRGI 2008.
This data will be printed on the header of the report.
SEE SECTION 13.11.
This menu allows the user to view and/or save the last test carried out.
SEE SECTION 13.12.
New
Existing
Result
CONTEXT KEY FUNCTION
Selects the available parameters.
Enters in the selected parameter setting.
Selects the available parameters.
OK
◄
►
15/01/14
10:00
Tightness test
TRGI
Gas meter
Result
New
Gas meter
Tightness test according UNI 7129-1: 2015 and
UNI 11137: 2012 (when the instrument version so
provides).
Tightness test according DVGW TRGI (when the
instrument version so provides).
To Next Page
Loading...
