2.1 Step 1: Get the camera ready (continued)
Place the camera on a solid
tripod. The Seitz 6x17 Digital
camera comes with a large (3/8‘‘)
thread. For smaller tripods (1/4‘‘
thread) can be inserted into the
camera bottom plate.
Connect the 3m ethernet cable*
by inserting it in the ethernet
socket on the camera and the
computer**:
* The ethernet cable can be of any distance
** It is also possible to operate the camera in a network
9
10
Insert the battery to the camera body
8
Instruction Manual Seitz 6x17 Digital - version 4.05 - May 2013- © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 11
To Next Page
Loading...
