Power
socket
The Seitz 6x17 camera can be operated either with the battery or by connecting the
camera to a permanent power supply.
Power supply:
Battery:
Important: make sure that the power supply is not plugged into the battery socket as a
malfunction may occur.
A single charge of the NiMh 12V 4.5A battery usually last for 5-6 hours of operation.
The camera has a built-in power save feature and shuts down all non essential
camera functions when idle.
Charging the 12V 4.5A battery
Standby
Pre Charge
Rapid Charge
Maintain
Error
Ready
Wait
Start of charging process (about 5 min.)
Main charging process (about 4-5 hours)
Charge complete
about
4-5
hours
interchangeable
6. Maintenance
6.1 Power supply: AC power adaptor and battery charger
Battery socket
Instruction Manual Seitz 6x17 Digital - version 4.05 - May 2013- © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 88
To Next Page
Loading...
