Sena STRYKER User Manual

TABLE OF CONTENTS CONTINUED
14. FIRMWARE UPGRADES 58
14.1 Wi-Fi-Enabled for Automatic Firmware Update 58
14.1.1 Connecting to the Bluetooth System 58
14.1.2 Connection Setup 59
14.1.3 LED Description 59
14.1.4 Wi-Fi Reset 60
15. CONFIGURATION SETTING 61
15.1 Bluetooth System Configuration Menu 61
15.1.1 Delete All Pairings 62
15.1.2 Remote Control Pairing 62
15.2 Software Configuration Setting 62
15.2.1 Headset Language 62
15.2.2 Audio Equalizer (Default: Music Balance) 63
15.2.3 VOX Phone (Default: Enable) 63
15.2.4 VOX Intercom (Default: Disable) 63
15.2.5 VOX Sensitivity (Default: 3) 64
15.2.6 HD Intercom (Default: Enable) 64
15.2.7 HD Voice (Default: Enable) 64
15.2.8 Bluetooth Intercom Audio Multitasking
(Default: Disabled) 65
15.2.9 Intercom-Audio Overlay Sensitivity (Default: 3) 65
15.2.10 Audio Overlay Volume Management
(Default: Disable) 65
15.2.11 Smart Volume Control (Default: Disable) 66
15.2.12 Sidetone (Default: Disable) 66
15.2.13 Voice Prompt (Default: Enable) 66
15.2.14 RDS AF Setting (Default: Disable) 66
15.2.15 FM Station Guide (Default: Enable) 66
15.2.16 Advanced Noise Control™ (Default: Enable) 66
15.2.17 Region Selection 67

Sena STRYKER Specifications

General

Bluetooth	Bluetooth 5.0
Intercom Range	Up to 2 km (1.2 miles)
Intercom Participants	Up to 4 riders
FM Radio	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Charging Temperature	0°C to 45°C (32°F to 113°F)
Codec	Built-in SBC Codec
Audio Multitasking	Yes
Voice Command	Yes
Charging Time	Approximately 3 hours
Profiles	HSP, HFP, A2DP, AVRCP
Audio	Advanced Noise Control
Battery Type	Lithium Polymer Battery
Mobile App Support	Yes (Sena Motorcycle App)
Sizes	M, L, XL