SENEC Wallbox pro s - Page 62

English
62
Contents
1. Introduction 63
2. Installation of the bus system 63
2.1 General requirements 63
2.2 Bus system in line wiring 63
2.3 Bussystemwithcentralwiringindistributor 63
3. Local and external load management 63
3.1 Prerequisites 64
3.2 Bustopology 64
3.3 Check-listforlocalloadmanagement 64
3.4 Check-listforexternalloadmanagement 64
4. Conguration of the Wallboxes 64
4.1 Congurationofmaximum(switchS1)andminimum
(switchS3)chargingcurrent(perWallbox) 65
4.2 SwitchS2 65
4.3 SwitchS4 65
4.4 SwitchS5 66
4.5 SwitchS6 66
5. Bus protocol
(external load management) 66
5.1 Modbusconnection 67
5.2 FunctionssupportedbytheModbusprotocol 67
6. Checking load management 67
English