Sensaphone 400 - To Program the Output Mode

102
SENSAPHONE 400 User’s Manual
Mode Description
Phone
•
#
CODE
Output on when phone line is unplugged for more than 15
seconds. Off when a phone line is plugged in.
Output on when any alarm occurs. Off when all alarms are
acknowledged.
Output controlled manually via keypad command or touch-
tone.
Output on when any alarm occurs, except for when a phone
line is unplugged. Off when all alarms are acknowledged.
8.1.1 to program the output mode:
1. Press the SET key.
SET
2. Press the OUTPUT key.
OUTPUT
PAUSE
AM
The 400 will say “Enter output mode.”
3. Using the number keys, enter a value for the output mode.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
4. Press the ENTER key.
ENTER
PM
The 400 will say “OK” and recite a description of the mode selected, such
as “Automatic on Zone 1” or “Manual.” Note that when Mode * is selected,
the 400 will simply say “Automatic on Alarm,” meaning that the output will
automatically turn on when any alarm occurs.