Sensaphone 400 - Interrogating for the Current Time; The Security Code

64
SENSAPHONE 400 User’s Manual
3. Using the number keys, enter the correct time. The Model 400 will recite
the digits as they are pressed.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
4. If the time is AM, press the AM key. The Model 400 will say “am” If the
time is PM , press the PM key. The Model 400 will say “pm.”
OUTPUT
PAUSE
AM
ENTER
PM
Example: You want to set the clock to 9:45 am. Press the following keys in
the order shown:
SET + CLOCK + 9 + 4 + 5 + AM
4.15.2 InterrogatIng For the Current tIme
To interrogate the Model 400 for the current time:
1. Press WHAT IS.
WHAT
IS
2. Press CLOCK. The Model 400 will recite the current time.
8
CLOCK
4.16 the SeCurIty Code
The Security Code is the last step after setting all other programming
parameters for the Model 400. The code consists of a 4-digit number you
select and will effectively prevent unauthorized changes to the Model 400’s
programming. When the Security Code is activated, all keyboard program-
ming is locked. The Model 400 may be interrogated using the WHAT IS
key, but the keyboard must be unlocked, via the Security Code, before any
programming changes are possible.