Sensaphone 400 - Interrogating the ID Number; Dial-Out Telephone Numbers

Chapter 4: Communications Programming
43
3. Using the number keys, enter up to 16 digits for the ID number. The
Model 400 will recite the digits as they are pressed.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
4. Press ENTER. The Model 400 will respond: “Okay.”
ENTER
PM
4.2.2 InterrogatIng the Id number
To interrogate the ID numbers:
1. Press WHAT IS.
WHAT
IS
2. Press ID NUMBER. The Model 400 will recite the Unit ID Number pro-
grammed.
0
ID NUMBER
POWER
4.3 dIal-out telephone numberS
The Model 400 can store up to four 48-digit phone numbers. These are the
numbers that will be called during alarm dial-out. In the event of an alarm,
the numbers are dialed sequentially, 1 through 4. Begin programming the
first telephone number by assigning it to the key labeled with the number
1 on the keypad, and continue to assign any other telephone numbers in
numerical order. A pause, pound or star can be added to an individual
phone number to access different phone and beeper systems. See Special
Dialing, Section 4.5.