18
SENSAPHONE 400 User’s Manual
Feature Summary
The Sensaphone 400 includes the following features:
• Four zones configurable as temperature or dry contact
• Each zone can be individually enabled or disabled
• Fully automatic input configuration
• Temperature sensor included on zone #1
• Calibration for each zone
• Power monitor
• High sound-level monitor
• User-recordable voice messages
• Dial out to four telephone numbers
• Alarm dial out via voice and numeric pager
• Microphone for onsite listen-in
• Built-in line seizure
• Relay output (manual or automatic control)
• Four status LEDs
• Surge protection on all zones, telephone line, and power supply
• 24 hour battery backup (batteries not included)
• Wall or desktop installation
about thIS manual
This manual comprises the instructions and commands for in-
stalling and operating the Model 400. The Quick Start chapter is
included to speed understanding of programming and operation.
Communication and Alarm Programming chapters demonstrate
step-by-step methods for utilizing the full range of available fea-
tures. The Troubleshooting chapter provides assistance in the event
that problems are encountered.
To Next Page