13
4.15 the CloCk ...............................63
4.15.1 Setting the Clock ..................................63
4.15.2 Interrogating for the Current Time ..................64
4.16 the SeCurIty Code .........................64
4.16.1 Locking the Keypad ...............................65
4.16.2 Unlocking the Keypad .............................65
Chapter 5: alarm programmIng ....67
5.1 Zone ConFIguratIon .......................67
5.1.1 Programming Zone Configuration .................... 68
5.1.2 Interrogating Zone Configuration ....................69
5.2 enable/dISable ZoneS ......................69
5.2.1 Changing Enabled/Disabled Zone Status ..............69
5.2.2 Verifying Enabled/Disabled Zone Status ..............70
5.3 Zone reCognItIon tIme .....................70
5.3.1 Programming Zone Recognition Time ................71
5.3.2 Interrogating Zone Recognition Time .................72
5.4 eStablIShIng hIgh and low temperature lImItS .72
5.4.1 Programming Temperature Limits for a Selected Zone ........72
5.4.2 Disabling Alarm Response to High or Low Temperature . 74
5.4.3 Interrogating High and Low Temperature Limits .......74
5.5 temperature SCale .........................75
5.6 temperature CalIbratIon ....................75
5.6.1 Programming Temperature Calibration ................75
5.6.2 Interrogating Temperature Calibration ................76
5.7 obtaInIng Current temperature .............77
5.8 aC power monItorIng enable/dISable ........77
5.8.1 Enabling/Disabling the AC Power Alarm ..............77
5.9 aC power FaIlure reCognItIon tIme. . . . . . . . . . .78
5.9.1 Programming Power Failure Recognition Time .........78
5.9.2 Interrogating Power Failure Recognition Time .........79
5.10 Sound alarm monItorIng .................79
5.10.1 Programming Sound Alarm Sensitivity ...............80
5.10.2 Interrogating Sound Sensitivity ...................... 80
5.10.3 Programming High Sound Alarm Recognition Time ......81
5.10.4 Interrogating High Sound Alarm Recognition Time ......82
5.11 hIgh Sound alarm enable/dISable ..........82
5.11.1 Changing Enabled/Disabled High Sound Alarm .......82
5.12 exIt delay ...............................83
5.13 deSIgnatIng a Zone aS unuSed .............83
To Next Page
Loading...