Sensaphone Sentinel Pro Installation And Setup Guide

38
Sentinel Pro Installation and Setup Guide
appendIx b: aCCessorIes
The sensors listed below are available from Sensaphone, and represent the most commonly used zone
devices. Other dry contact sensors, designed for more specialized applications, may also be used.
Commercial or industrial electrical supply houses can provide devices to monitor virtually any condi-
tion. For further information, contact Sensaphone Customer Service at 610-558-2700.
PART # ......SENSOR / SWITCH
BAT-0032 .....Sentinel Pro Battery
FGD-0006 .....Magnetic Reed Switch
FGD-0007 .....Passive Infra-Red Detector
FGD-0010 .....50’ two-conductor #22AWG shielded Cable
FGD-0013 .....Spot Water Detector
FGD-0022 .....Temp° Alert
FGD-0027 .....Humidistat
FGD-0049 .....Smoke Detector with Built-in Relay
FGD-0052 .....Humidity 4-20mA Transmitter
FGD-0053 .....24VDC Power Supply
FGD-0054 .....Power-Out Alert™
FGD-0056 .....Zone Water Detector w/Water Rope
FGD-0063 .....Additional 10’ Water Rope for FGD-0056
FGD-0065 .....Carbon Monoxide Sensor
FGD-0066 .....Air Quality Sensor
FGD-0067 .....Surge Suppressor
FGD-0100 .....2.8k Remote Temperature Sensor
FGD-0101 .....2.8k Weatherproof Temperature Probe
FGD-0102 .....10k Weatherproof Temperature Probe
FGD-0103 .....10k Indoor Decorator
FGD-0104 .....10k Outdoor Air Weatherproof
FGD-0205 .....Multi-Point Wireless I/O System

Sensaphone Sentinel Pro Specifications

Power

power input voltage	11.5 - 20 VDC
power input current	350mA nominal/650mA peak
battery backup	12V 3.4 AH

Operating Environment

operating temperature	0° to 135°F (-18 to 57°C)

Weight and Dimensions

enclosure dimensions	14” x 12” x 7.4”
weight	12 Lbs.