Sensaphone Sentinel Pro Installation And Setup Guide

39
Appendix C: Specifications
appendIx C: speCIfICaTIons
ALERT ZONES
Number of Zones: 12
Zone Connector: terminal block
Zone Types: N.O./N.C. contact, 2.8K Thermistor ( -109° to 115ºF, -85º to 57ºC ) And 10K Thermistor
(-87° to 168°F; -66° to 76°C), and 4-20mA (-80,000.0 to 80,000.0
Zone Characteristics: 28.7KΩ to 3.3V (temperature/contact) or 250 Ohms to ground (4-20mA)
A/D Converter Resolution: 12 bits ±2 LSB
Zone Protection: 5.5VDC Metal Oxide Varistor with fast acting diode clamps.
RELAY OUTPUT
Rated for 1A 30VAC/ 1A 30VDC Maximum
DATA LOGGING
5 minutes to 1 month sampling rate
User programmable channel selection
Zones 1 – 12
Battery
Input Power
LED INDICATORS
Power: On steady when the unit is powered on.
Alarm: Off when no alarm exists.
Ethernet Link and Activity LEDs
Online
Standby
COMMUNICATION TYPE:
10/100 BASE-T Ethernet with SSL encryption
POWER SUPPLY
Power Supply: 120VAC/12VDC 50/60Hz 6W wall plug-in transformer w/6’ cord.
Power Consumption: 2 Watts
Power Protection: Metal Oxide Varistor
Battery Backup: Internal 8 hr battery backup module (Part #BAT-0032).

Sensaphone Sentinel Pro Specifications

Power

power input voltage	11.5 - 20 VDC
power input current	350mA nominal/650mA peak
battery backup	12V 3.4 AH

Operating Environment

operating temperature	0° to 135°F (-18 to 57°C)

Weight and Dimensions

enclosure dimensions	14” x 12” x 7.4”
weight	12 Lbs.