Section 4 RF/ID Tag Reader Io
SENSOR
54
SMT-200 Operations and Technical Manual 2.00/R1
Default are visible the files with extension *.txt in the \SMT200\TAGS directory.
Select a file and press the button Open, the Docking Station then starts sorting the file. This may take
some time when a large file is selected. A ‘busy’ message is displayed. You can quit by pressing Esc.
After the conversion is finished, a report is displayed where error messages are displayed. Normally
there will be no messages. The tags displayed in the conversion report are removed from the
converted list.
To Next Page
Loading...