Sensor SMT-200 - Geophone Basics; Polarity Test

152 pages

Save Page as PDF

To Next Page

To Previous Page

Io SENSOR

Section 7 Docking Station Technical

SMT-200 Operations and Technical Manual 2.00/R1

circuit switches from State 3 to State 4 from 10% to 50%. This allows for the extra current drawn by

the SMT-200 when it’s on.

Main Page

Table of Contents6
Section 1 Introduction11
Introduction13
Technical Support13
Overview14
Specifications14
Packaging Information15
Before Use16
Voltage Selection16
Battery Charging16
Section 2 Smt-200 Operations17
Layout19
Switching on the SMT-20019
Post Mortem on Powering up20
Navigating Around the Screens20
Switching off the SMT-20023
Battery Level24
Battery Level Jumper Setting25
Menu Flowchart26
Do a Test Select this Option to Initiate a Test Sequence on a String29
Setup Menu Allows Customisation of the SMT-200 Operating and Test Parameters30
String Menu Set the String Geometry and Leader Parameters30
Limits Menu Sets Maximum Allowable Limits for Various Tests31
Geophone Menu Selects and Modifies if Required the Type of Geophone Element Used31
Select Menu Selects the Type of Geophone Element Used32
Edit Edit the Geophone Parameters32
Copy Copy Existing Element Description to a New Geophone Type32
Delete Deletes an Existing Element Description32
Operating Menu General Options for String Testing33
Tests Sequence Selects the Tests to be Performed on the String34
Display Menu Customises Display, Keypad and Sound Options34
Power Menu Selects the Various Power Saving Options35
Date & Time Sets the SMT-200 Clock35
Diagnostics Runs the Diagnostics and Calibration Routines36
Temp. Menu Read or Set the External Temperature and Temperature Options38
File Menu Internal File Handling and Data / Code Transfer Options40
Redisplay Last Shows the Result of the Last Test Run40
Storage Status Indicates the Internal Memory Storage41
Dump Data File Transfer Contents of Data File to COM Port41
List Data File List Contents of Data File42
Erase Data Clears Contents of Data File42
Read Config Loads the Stored Configuration File43
Save Config Saves the Configuration File43
About Provides General Information about the SMT-20044
- Battery Pack119
- Docking Station120
- Accessories and Cables122
- Appendix D Schematics & Layouts123
- Schematics125
- Geophone Tester125
- Adc126
- Filter127
- Keyboard128
- Dac129
- Geophone Circuit130
- Power131
- Display132
- Component Layout (SMT-200.7 01/98)133
- Docking Station Schematics134
- Docking Station / Charger134
- Uc3906-B1135
- Uc3906-B2136
- Component Layout (SMT-200.7 CHARGER 01/98)137
- Appendix E Quick Reference139
- Quick Reference141
- Appendix F Addendum145
- Addendum147
- Index149

Sensor SMT-200 - Geophone Basics; Polarity Test

Table of Contents