3–8 Sensus Metering Systems
Chapter 3: Find Route Information
 Search for a Meter ID
During the route, you may need to display information for a
specific meter ID. Depending on how you run the route, you
may take a meter reading out of order or the actual meter ID
may not match the information stored in the route. You can
use the TAB key to page through every location on the route
and find the meter ID or you can use the search function.
To search for a meter ID...
1 Open a route.
See
Start Collecting Data
on page 2-2 for instructions on
opening a route.
2 Press the F3 key.
The system displays the Search Route... menu.
Search Route... Menu
3 Use the PgUp/PgDn key to select Meter ID.
4 Press the ENTER key.
The system displays an Enter Text dialog box.
5 Use the keypad to enter the Meter ID that you would like
to search for.
No Matches Found Message 6 Press the ENTER key.
The system displays the results of the search.
• If the system cannot find the information you entered,
then the screen displays a No Matches Found message.
Note
F3 is the default key assignment for the Search
menu. Key assignments can be changed. For
more information, see About the Key
Controls/Functions.
To Next Page
Loading...
Need help?
General
