Sensus AR5000 User’s Guide 3-13
Find Unfinished Sections of the Route
The system displays the Search Route... menu.
3 Use the PgUp/PgDn key to select UnRead Meters.
4 Press the ENTER key.
Search Results ScreenThe system displays the results of the search.
No Matches Found Message• If the system cannot find the information you entered,
then the screen displays a No Matches Found message.
Press the Esc key to clear the No Matches Found
message and end the search.
• If the system finds more than one match for the
information you entered, the screen displays the first
match, along with the following choices:
Stop here - Press the ENTER key to stop the search on
the displayed location.
Next Location - Press the TAB> key and the system
displays the next location in the search results.
No More Matches Found
Message
You can use the TAB> key to scroll through the entire
list of search results. Once you reach the end of the
search results, the system displays a No More Matches
Found message.
Press the Esc key to clear the No More Matches Found
message and end the search.
 Find UnVisited Location
The AR5000 typically associates meter IDs with a particular
location or address (see
Manage Reading Scenarios
on
page 2-7). When you visit a location, you typically enter
Note
F3 is the default key assignment for the Search
menu. Key assignments can be changed. For
more information, see About the Key
Controls/Functions.
To Next Page
Loading...
Need help?
General
