3–24 Sensus Metering Systems
Chapter 3: Find Route Information
• Visited - Lists the number of locations visited (see
Find
UnVisited Location
on page 3-13).
• Unvisited - Lists the number of locations that have not
been visited (see
Find UnVisited Location
on page 3-13).
At any time during the reading process, you can review an
on-screen report of these statistics. This report can be useful
as a quick reference at the end of your route, to verify that
you have completed all of the necessary tasks for that route.
You can also use this report at the beginning of a route to
check for questions, marks, and notes that could require
special attention during that route.
To review route statistics...
1 Open a route.
See
Start Collecting Data
on page 2-2 for instructions on
opening a route.
2 Press the F6 key.
Configuration Menu The system displays the Configuration menu.
3 Use the PgUp/PgDn key to select Route Statistics.
4 Press the ENTER key.
Statistics Screen The system displays the Statistics screen for the route you
have open.
5 Press the Esc key to exit the Statistics screen.
Note
F6 is the default key assignment for the
Configuration menu. Key assignments can be
changed. For more information, see About the
Key Controls/Functions.
To Next Page
Loading...
Need help?
General
