Error Log 6-2
iPERL Water Management System Technical Manual WRMTM-40001
6.2 Acknowledging Errors
To acknowledge errors in the Unipro application:
1. Follow the steps in “Viewing an Error Log”.
2. Select the row for the error you would like to acknowledge by clicking the black arrow on the left side
of the table.
3. Click the Acknowledge button to acknowledge a single error or click the Acknowledge All button to
acknowledge all errors in the list.
The error(s) will be removed from the table.
To select more than one error, hold down the Ctrl key while selecting rows.
To Next Page
Loading...
