Reporting 4-1
iPERL Water Management System Technical Manual WRMTM-40001
4 Reporting
This chapter provides information on:
• The types of default reports available in the iPERL™ system.
• How to view reports in the Unipro™ application.
• How to print reports.
4.1 Default Data Reports
Each time the iPERL system is programmed, a report is automatically generated and saved to the default
folder. The report contains all the parameter settings that were downloaded to the register. In addition, each
time a log data is retrieved from the register, the tabular data is automatically saved to a file in the default
folder.
The iPERL system allows you to view the following data reports:
• Meter Programming
• Data Logging
•Alarms
• History
• Diagnostics
• Lifetime
To Next Page
Loading...
