SENSYS SBL10 - Connecting an external GPS with the PDA

+49 33631 59 650
info@sensys.de
www.sensys.de
Manual
SBL10
31 / 69
Version 1.27
9. Select COM port 4 (if available) or any other available port from the drop down menu (15) and
select the „Secure Connection“ check box (16). Confirm you selection by tapping „Finish“ (17).
10. The final screen should look like the example below (18).
Connecting an external GPS with the PDA7.1.1
Make sure the GPS which is be used with the PDA features the required Bluetooth connection.
Follow the steps listed in Chapter 7.1 Connecting the SBL 10 with the PDA to set the
connection of GPS and PDA.
29