+49 33631 59 650
info@sensys.de
www.sensys.de
Manual
SBL10
47 / 69
Version 1.27
You cannot transfer the data from the PDA to MAGNETO
®
. A detailed description on how to transfer
the data can be found in Chapter 7.10 Data Transfer. Data processing with MAGNETO
®
is
described in the corresponding software manual.
Borehole Survey7.6
For each borehole survey a borehole or borehole field needs to be created within the project. You
can create any number of fields in a project.
To do so select "Menu" - "New" - "Borehole Field" (1). Enter the name of the borehole field and the
sensor you use in the following screen. You can add different sensors in the "Project Settings" later
to measure a borehole field with more than one sensors. After pressing "Create" you will get to the
"Selection of Borehole".
In the "Selection of Borehole" you have the possibility to create new boreholes, borehole rows/fields
and fields for suspicious points. Additionally you can manage existing boreholes or import new
boreholes from external sources.
63
To Next Page
Loading...
Need help?
General