+49 33631 59 650
info@sensys.de
www.sensys.de
Manual
SBL10
60 / 69
Version 1.27
Exporting Measurement Data7.9
Different export formats are available depending on surveyed data.
Data from borehole measurements are to be exported manually. This is due to the fact
that the data can still be georeferenced later on. For data from field measurements, a
DLM-file is created automatically which is not georeferenced. For data from line
measurements, PRM-files including measurement data and GPS position are created
and saved automatically for each track.
Field Measurements7.9.1
Apart from automatically created DLM-files, the following export formats are available:
UXO
Three UXO formats are available:
- UXO: Measurement data and corresponding position on even grid
- UXO (ungridded): Measurement data and corresponding position ungridded
- UXO (V): Measurement data and corresponding position in "Vallon-format"
Keep in mind: UXO- and DLM-files contain local coordinates only (no GPS positioning data).
·
Mark the field which is to be exported.
·
Select "Menu" - "Export" (1) - "Export UXO" (2).
·
One of the three UXO formats can be set under "Format" - "UXO" (3).
·
Other format parameters can be modified according to your requirements.
·
Click "OK" (4) to start the export and wait until the export is completed.
To Next Page
Loading...
Need help?
General