Sequoia FastTracer User Manual

45
Esplora 3D
5.1 Philosophy of use
Esplora 3D is Sequoia IT software solution designed for maintenance operators in charge of
machine or installation diagnostics. Esplora 3D makes it possible for the maintenance operator to
carry out predictive diagnosis by following the program instructions based on the comparison of
threshold values.
As outlined in the previous chapter, the expert user sets up an archive of the different tests and
related guidelines with FTEditor, while the maintenance operator will perform these tests through
the Esplora 3D software for the machine state detection.
Architecture for use of Sequoia IT software
Through the Esplora 3D specific module, it is possible to save these tests for the creation of
automatic reports and maintenance sheets regarding the examined machine.
Esplora 3D is based on the Model Instance and Model DB concepts explained below.
5
Vibrational analysis
Test model
Experiment
Cause-effect analysis
Vibration expert user
Specific tests
Machine-dedicated
diagnostics
Standard diagnostics
Maintenance operator

Sequoia FastTracer Specifications

General

Brand	Sequoia
Model	FastTracer
Category	Measuring Instruments
Language	English