Sequoia LISST-200X - Page 116

LISST-200X User’s Manual Appendix E: Connector Pinouts for LISST-200X Page 108
Auxiliary I/O Connector (6 pin connector)
Connector Manufacturer: Teledyne Impulse, San Diego, CA, USA
Connector Part Number (Bulkhead): MCBH (WB)-6-MP Stainless Steel
Mating Cable Part Number: MCIL-6-FS
Analog and Digital Configuration
Connector Pin #
Use
1
Ground
2
Digital In #1
3
Digital In #2
4
+12V out
5
Analog In (0 to 5V max)
6
Ground
Analog Input Configuration
Connector Pin #
Use
1
Ground
2
No connection
3
Ground
4
+12V out
5
Analog In #1 (0 to 5V max)
6
Analog In #2 (0 to 5V max)
Analog Output Configuration
Connector Pin #
Use
1
Ground (Power)
2
Analog Output: Mean Size
3
Ground (signal)
4
Analog Output: Total Concentration
5
Ground (signal)
6
Power In (8 to 24VDC)
The current configuration of the Auxiliary I/O connector can be found by issuing a DS
command at the command prompt.