LISST-200X User’s Manual LISST-200X Operation Details Page 54
• A display similar to the one shown below will appear.
• The top portion of the display is a graphical
representation of the raw data from the 36 rings. The
value of the 36 rings is represented as a vertical line,
with time moving from left to right.
Main data processing
selection window
displayed to the screen.
• The lower portion of the display shows the time history
of some of the Auxiliary parameters. This can be
useful for determining when the instrument came out
of the water, when a particular profile was started, or
for determining what range of the raw file to process.
To change which Auxiliary parameters are displayed,
choose the Aux Params tab from the Settings window.
• Note that only 400 samples of the Auxiliary
Parameters are displayed at a time. Use the Next and
Previous buttons to move through the complete data
file. The triangles on the lower edge of the upper
display will indicate where in the complete data file the
currently displayed section is located.
• Additional information is stored in the data file.
Selecting the Show Auxiliary Parameters from the
View menu opens a window that displays this
additional information. The information displayed is for
the sample located at the position of the cursor (the
vertical pink line) in the lower plot of the raw data
display. You can click on the lower plot to move the
cursor to a new location. An example of this window
is shown below.
Auxiliary parameter
window displayed.
To Next Page
Loading...
