User Manual SERVOPRO Plasma Trace N
2
Analyzer
4.0 SPECIFICATIONS
• Fully microprocessor-controlled, with 4 x 40 LCD display
• Self-diagnostic system software
• Auto-zero, auto-span calibration system (optional).
Provides maintenance-free system
• Digital output:
4 digital outputs: 3 are for range indication and1 for system status monitoring
Relay contact rating: 30 Vrms, 42.4 V peak or 60 Vdc
• Alarm output:
2 digital outputs for a specified value chosen by the user
Relay contact rating: 30 Vrms, 42.4 V peak or 60 Vdc
• 4-20 mA isolated output
Maximum load impedance: 600 Ω at 20 mA DC
Isolation: 750 VDC or AC peak maximum
• Serial port: RS-232 (optional)
• Custom options: contact factory
• CE and Y2000 compliant
• CSA approval on demand
- The analyzer is rated in accordance to Over Voltage Category II, Pollution Degree 2
- Ingress protection: IP20.
The SERVOPRO PLASMA analyzer is only suitable to measure nitrogen in helium and argon.
To Next Page
Loading...
Need help?
General
