User Manual SERVOPRO Plasma Trace N
2
Analyzer
2.0 CAUTIONS AND WARNINGS
6
The nitrogen is a diatomic molecule and is colorless, odorless and non toxic. However, nitrogen
can also act as a simple asphyxiate by displacing the necessary amount of oxygen to support life.
Proper ventilation must be done to provide safe area.
2.7 General safety instructions
To avoid the risk of electric shock, do not remove the casing or open the back. There are no user
serviceable parts inside. Leave servicing to the experts!
To prevent fire or the risk of electric shock, keep this unit out of the rain and away from
moisture. The lightning symbol inside an equilateral triangle means that there are live,
uninsulated parts inside this unit that may give you a dangerous electric shock if touched.
1. Instructions: Read all the safety instructions and all the operation instructions thoroughly
before using the unit for the first time. Keep these safety instructions and operating
instructions somewhere safe in case you need to refer to them again in the future.
2. Safety warnings: In your own interest pay heed to all the safety warnings on the unit and in
the operating instructions. Follow the instructions on operation and use of the unit in every
respect.
3. Water and moisture: Never use the unit near water, for example near a bath, a wash basin, a
sink a washing machine, in a damp cellar or near a swimming pool.
4. Ventilation: Wherever you put the unit, always ensure there is sufficient ventilation. Never
put the unit on a bed, for example, or a sofa. a carpet or similar surface that might block the
vents. Make sure there is proper ventilation to avoid overheating.
5. Effects of heat: Do not put the unit anywhere near sources of heat, such as radiators, hot-air
shafts, ovens, etc.
6. Power source: Connect the unit only to the power source indicated on the operating
instructions or on the unit.
7. Protecting the power cord: Run the power cord so that no one can step on it and nothing can
rest on or against it. The power cord is particularly at risk in the area of the plug, the socket
and where it comes out of the unit.
8. Cleaning: Follow the manufacturer’s recommendations for cleaning the unit.
9. Unit not in use: If you are not going to use the unit for some time, remove the plug from the
socket.
10. Foreign bodies: Take great care to ensure that no liquids or other foreign bodies can find
their way inside the unit through the openings in the casing.
11. Repair in the event of damage: The unit should only be repaired by qualified personnel.
Never try to do more in the way of maintenance to your unit than the operating instructions
allow. Beyond that, always consult an expert for repair work.
To Next Page
Loading...
Need help?
General
