NOTE: Do not attempt to open the controller as there are no serviceable components. Opening
the controller will invalidate the warranty.
NOTE: Do not mechanically modify the controller in any way as unexpected damage may occur.
Mechanically modifying the controller will invalidate the warranty.
NOTE: Use cables of the appropriate rating and fuse them according to the applicable national
vehicle and electrical codes.
NOTE: Do not use any other form of fasteners other than those supplied with the controller
without contacting Sevcon for advice. Use of inappropriate fasteners or torques could damage
the controller.
NOTE: Where appropriate use of a suitable line contactor should be considered.
CAUTION: Electric vehicles are subject to national and international standards of construction
and operation which must be observed. It is the responsibility of the vehicle manufacturer to
identify the correct standards and ensure that it’s vehicle meets these standards. As a major
electrical control component, the role of the Gen4 motor controller should be carefully considered
and relevant safety precautions taken. The Gen4 has several features which can be configured
to help the system integrator to meet vehicle safety standards. Sevcon accepts no responsibility
for incorrect application of its products.
To Next Page
Loading...
Need help?
General
