61
7 Setting up the Room Containment unit
7 Setting up the Room Containment unit
7.1 Inserting the battery
1. Push the battery compartment cover at the rear up-
wards.
2. Insert the supplied batteries (4x AA) into the battery
compartment (fig. 17) in accordance with the symbols.
3. Re-attach the battery compartment cover
7.2 Setting up the Room Containment unit
The Room Containment unit can be used to block the robot's
access to passageways.
1. Switch on the Room Containment unit with the slide
switch on the top.
2. Place the Room Containment unit in the passageway
(fig. 18).
To Next Page
Loading...
