SEW-Eurodrive MOVIDRIVE MDA Series User Manual

4
Installation
Installing options and accessories
Operating Instructions – MOVIDRIVE
®
modular
93
4.7 Installing options and accessories
4.7.1 Installing a card
Observe the safety notes in chapter "Electrical installation"(→275).
INFORMATION
Requirements for installation.
Cards can only be installed in axis modules suitable for option cards.
For information on which option card can be installed in which slot, refer to chapter
"Card slots"(→247).
1. Disconnect the application inverter from the power supply. Disconnect the DC 24V
supply and the line voltage.
2. Ensure electrostatic discharge with suitable measures before starting the work.
Suitable measures for equipotential bonding are e.g. the use of a discharge strap
or wearing conductive shoes.
3. Remove the safety cover [1] from the front of the application inverter.
1.
2.
[1]
5
4
3
2
1
5
4
3
2
1
27021611749935499
24748536/EN – 11/2017

SEW-Eurodrive MOVIDRIVE MDA Series Specifications

General

Brand	SEW-Eurodrive
Model	MOVIDRIVE MDA Series
Category	Control Unit
Language	English