Neuform TXR2-V-70
Neuform TXR2-V-70 is an electrically in-
flight adjustable propeller with two
composite blades. The blades are made
of glass-fiber and are hollow. The root of
the blade is made of duralumin. Outside
part of blade leading edge is cast of
plastic material with improved
resistance to abrasion.
An electric servo located on the engine
gearbox controls the pitch of the blades.
Mechanical stops and micro switches of
maximum and minimum angle of attack
are situated on the servo brackets.
A Flybox unit is used to set the required
propeller RPM
To Next Page
Loading...
