Emergency Landing Gear Release Notes:
• If you have any doubts that the landing gear is not properly down
and locked, check the gear visually via the gear position
indicators in the inspection windows
• The gear position indicator red-black flag-arrows need to be
aligned. This visual check is the primary indication and takes
precedence over the LANDING GEAR indications on the
instrument panel
• When the Emergency Landing Gear Release is used, it is not
possible to retract the gear until the release mechanisms are re-
assembled by an authorized technician
• In case of one landing gear leg staying locked in the up position,
it is a safe procedure to retract the other gear legs as well and
perform a belly landing
To Next Page
Loading...
