The minimum recommended altitude for system activation is 200 m
(660 ft). However, there are known cases of successful application in less
than 80 m. Successful activation also depends also depends on the
horizontal and vertical component of velocity. System lifetime is 18
years, the revision and repackaging have to be performed every 6 years
The activation mechanism
The activation mechanism is made of a Teflon coated steel cable
and an outside sleeve (Bowden type). Each activation handle has
double safety mechanism to prevent accidental launch and lock
mechanism for storage and transport.
The mechanism is designed to have minimal activation forces
under all circumstances. This minimal resistance remains
throughout the life of the system.
To Next Page
Loading...
